Pre-order: save 20% · Ships from December 2026

0

Your Cart is Empty

FAQ

Answers about Jupiter, Pluto 2 and Io are on this page. Each product page also has its own FAQ, and every device has a full manual. Questions about Pluto 1 (Pluto Trigger) are at the bottom of this page.

Choosing a product

Which Ortta device is right for me?
  • Jupiter: a pocket Bluetooth remote with a color screen for cameras, action cameras and your phone.
  • Jupiter Pro: everything Jupiter does, plus infrared, a shutter cable port, Canon Wi-Fi control, built-in shooting programs and GPS.
  • Pluto 2: a trigger for high-speed photography and automatic shooting, with lidar, laser, sound, light and lightning sensors.
  • Pluto 2 Pro: everything Pluto 2 does, plus USB camera control, a faster lidar, GPS, voice commands and infrared.
  • Io: a tiny Bluetooth receiver that fires a camera through its shutter-release socket.
  • Io Pro: a Bluetooth receiver that connects to the USB port of your camera, with live preview and photo review.

Cameras and compatibility

Does it work with my camera?

Type your camera model in the compatibility list to see how each device connects to it. Cameras with a Bluetooth remote (Canon, Sony, Nikon, Fujifilm, Panasonic) connect directly to Jupiter, Jupiter Pro, Pluto 2 and Pluto 2 Pro. Cameras with only a shutter-release socket work with Io, or with a shutter cable on Jupiter Pro, Pluto 2 and Pluto 2 Pro. Many cameras also work over USB with Io Pro and Pluto 2 Pro. Which functions you get depends on the camera model.

Can I use several devices together?

Yes. Jupiter and Jupiter Pro can fire Pluto 2, Pluto 2 Pro, Io and Io Pro, so a camera without Bluetooth becomes wireless. Jupiter Pro can also start their shooting programs. Jupiter sends Shutter and Video only. You can pair up to 10 devices and enable up to 6 at once, so one press can fire several cameras together.

Does my camera need Bluetooth?

Not if you use Io or Io Pro. Io fires the camera through its shutter-release socket, and Io Pro controls it over USB. Both bring Bluetooth to a camera that has none.

Is live preview real-time?

No. Live preview is sent over Bluetooth, which has limited bandwidth, so it is not a real-time video feed: expect a delay of 0.2 to 2 seconds and 2 to 8 frames per second, depending on the camera. It is good for framing a shot and checking the scene from a distance, but not for following fast action.

Apps and firmware

Which apps do I need?
  • Ortta app runs programs, uses the sensors of your phone, shows live preview and photos, and updates firmware. App Store · Google Play
  • Ortta Camera turns a phone into a camera that your Ortta device can fire. App Store · Google Play
  • Ortta Watch controls Io, Io Pro and Pluto 2 from an Apple Watch.

Jupiter, Jupiter Pro and the devices' own screens work without any app.

How do I update the firmware?

Each manual has a Firmware Updates chapter for that device. Find your device on the manuals page.

Orders, shipping and returns

When will my pre-order ship?

We expect to ship pre-orders from December 2026. This is an estimate. If we expect to miss it, we will email you. See Shipping.

Can I cancel a pre-order or return my order?

You can cancel a pre-order for a full refund before it ships. After delivery, returns are accepted within 14 days. See Returns.

Will I have to pay customs or import fees?

Orders ship from China. Import duties and taxes depend on your country and are not included in the price. See Shipping.

Is there a warranty?

Ortta devices have a 12-month warranty against manufacturing defects, from the day you receive them. See Returns.

Getting help

Where can I find manuals and videos?

Every device has a full manual, and there are step-by-step tutorial videos for each product.

How do I contact you?

Email info@ortta.co with your order number and your camera model. We reply as soon as we can.

Pluto 1 (Pluto Trigger)

Pluto 1 is no longer sold. Pluto 2 is its next generation. The questions below are about Pluto 1.

Is my camera supported?

Pluto 1 supports a lot of cameras: Canon, Nikon, Sony, Panasonic, Pentax, Minolta, Olympus and more. If your camera supports a wired remote control, then Pluto 1 supports it. If your camera does not support a wired remote, it could still be partially supported if it supports IR or wireless remote control methods. See the list of compatible cameras.

Can I use auto focus mode with Pluto 1?

Yes, auto-focus is supported. You can set "focus time" to let your camera pre-focus before releasing the shutter. Keep in mind though, with auto-focus turned on you are not guaranteed a good picture each time.

Does Pluto 1 support video recording?

It depends on your camera. If your camera's video recording is triggered by the shutter or by IR remote control, then Pluto 1 will be able to start and stop video recording on your camera.

How do I set my camera to BULB mode?

On some cameras, just dial the exposure mode wheel to "B". On other cameras, set your camera to manual exposure mode, and set shutter speed to the slowest setting. The display will show a "B".

My camera does not have a shutter release port. Can I still use Pluto 1?

Yes, if your camera supports IR remote control. You can use the infrared remote to trigger your camera, but with limited functionality. You will not be able to use modes which require BULB mode.

Does my phone have to stay on during a time-lapse?

Once you have entered a given mode (except Smart Sensors modes), Pluto 1 runs independently. You can walk away with your phone.

Can I use Pluto 1 in really cold conditions?

Yes, but in cold conditions the battery drains much faster. You can use any 5V output battery pack to power Pluto 1 externally.

Does Pluto 1 have live preview or image transfer?

No. Live preview and image transfer need a USB connection and Wi-Fi, which would make the trigger more complicated and power hungry. Pluto 1 uses Bluetooth Low Energy, so it is easy to use and lasts a whole day of continuous use per battery charge.

The newer devices can do more: Io Pro and Pluto 2 Pro read photos from the camera over USB, and Io Pro adds live preview. See Io Pro and Pluto 2 Pro.

As a high-speed trigger, what are the specifications?

The response time for Sound, Light and Aux modes is 1 ms. The response time for Lightning mode is about 0.2 ms. The response time for Laser mode is tens of microseconds. These are the delays caused by Pluto 1 itself. The camera's own shutter delay is not counted.

For Smart Sensors modes, can I turn off the phone screen while the program runs?

For Sound and Voice modes, you can send the app to the background or even turn off the phone screen. For Vibrate, Motion, Distance and Smile modes, you have to keep the phone screen on with the app in the foreground.

My phone cannot find Pluto 1, or Bluetooth pairing is rejected. Why?

Do not use the Bluetooth menu in your phone's Settings. You need to scan and pair with Pluto 1 inside the Pluto Trigger app. Follow the Quick Start Guide, and remember to turn on Bluetooth on your phone.

I did not see the Nikon D750 on the list. Is it compatible?

The Nikon D750 is on the list. It works with the DC2 cable, not the DC0 cable.

In Lightning mode it keeps shooting and there is no lightning. Why?

You have set the sensitivity too high.

In Lightning mode, the sensor reading is the change of the light, not the light intensity itself. When the light does not change, the reading should be very small. Only at the moment of lightning should the reading increase sharply and cross the threshold.

You can test Lightning mode by covering the light sensor with your hand. Adjust the sensitivity so that the sensor reading is lower than the threshold (the small triangle in the middle of the arc). Then move your hand away quickly. The reading should increase sharply and cross the threshold. Press the start button to start Lightning mode. Now your camera is triggered only when you move your hand away.

I received Pluto 1, but the camera cable I ordered is not in the package.

The camera connection cable is in a separate small white box inside the outer packaging. The cable in the Pluto 1 box is the flash PC sync cable.

I try to release the shutter with the IR of Pluto 1, but it does not work.

Adjust the IR settings in the app and switch your camera to Timer or Remote mode.

Do I need a smartphone to operate Pluto 1?

Yes, you need a smartphone or tablet to operate Pluto 1. Compatible devices are iPhone 4s or later, iPad 3 or later, iPad Mini, iPod Touch 5 or later, and Android 4.3 or later with Bluetooth 4.0 LE (Low Energy). The Pluto Trigger app is used to adjust the settings and start one of the modes on the trigger. Some modes (Sound, Light, Lightning and PIR) can then run stand-alone without a phone, even after a power cycle.

Pluto 2 has its own color screen and does not need a phone.

The auto focus shutter release mode does not work on my camera.

Turn off Back Button Focus on your camera.

Does the unit have to be in the hot shoe to work with the camera?

No. Pluto 1 does not have to be mounted in the hot shoe. You can hang it off the side of your camera.